|
|
|||||||
| VoIP & Your Hardware/Software Cisco, Linksys, Sipura, Netgear, Grandstream, Polycom, Xten, etc. |
 |
|
|
Thread Tools | Display Modes |
|
|
01-09-06, 10:30 AM
|
#1 |
|
Senior Member
Join Date: Apr 2006
Posts: 315
|
Netgear Unlocked Firmware, TA612V Upgrade: HowTo
To upgrade the Firmware on your Netgear:
(This doesn't apply to locked units) 1) Obtain the firmware (some available here) Unzip it and save it on your hard drive - note the location. 2) Login to the unit, as described here. 3) Select "Firmware Upgrade" from the menu on the left hand side. 4) Click "Browse" and navigate to the location where you saved the unzipped file (from step 1) 5) Click "Upload" 6) Do not interrupt the unit while it is upgrading.
__________________
._._._._._._._._._._._. "The more we know about the universe the more it is evident that it is pointless and meaningless." Steven Weinberg |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Linksys RT31 firmware upgrade | GlorifiedG | VoIP & Your Hardware/Software | 1 | 26-02-07 10:11 AM |
| Constant Busy Signal using Netgear TA612V | gregc | VoIP & Your Hardware/Software | 5 | 15-01-07 02:50 PM |
| help with firmware upgrade on engin locked TA612V | phred | VoIP & Your Hardware/Software | 1 | 20-12-06 01:29 PM |
| Problem setting up netgear ta612v | cubix | VoIP & Your Hardware/Software | 2 | 29-10-06 02:41 PM |
| Linksys PAP2 Firmware Upgrade | Al. | VoIP & Your Hardware/Software | 0 | 18-05-06 04:18 PM |
Hybrid Mode
